New Zealand will be shutting down effective 11.59 pm on Wednesday (New Zealand time) as part of the move to the level 4 restrictions to contain COVID-19. Part of these restrictions is that non-essential businesses must close for the next four weeks.
After today, we will not be able to manufacture or ship non-essential products until the level 4 designation is lowered. We will continue to manufacture on an as needed basis for our Nortec medical line and are looking at opportunities to support the healthcare supply chains in any way we can.
If we receive critical orders from customers that the New Zealand government recognize as essential businesses, we will do our best to reopen production in a limited way in total compliance with our COVID-19 response plan to support these customers.
Our team will be available over this time via email or phone if you have any questions.
All the best and stay healthy.
Lincoln Smith Director Zenitec – home of Clogger, Harvestwear and Nortec Medical
The global spread of COVID-19 is affecting every one of us.
At Clogger, we are safety first, and we do what we do with the belief that we can improve lives by providing better chainsaw protection. Our goal is to make sure that our customers and retail partners can continue to access our chainsaw protective products through this crisis.
We are doing this in the following ways.
We are planning to go ahead with our Pink Zero campaign to support student and recently graduated women arborists. The new products that we have been working on will still be launched. Upgrades and improvements are still being made. We will get through this crisis and we want to make sure that we continue to build for the future.
In Our Facility
New Zealand is still relatively isolated from the Convid 19
crisis however we expect that to change.
Currently, we are monitoring everyone’s health and increasing
our sanitizing procedures in addition to ending international travel by
employees. We will increase precautions based on expert advice.
Our goal is to maintain our production schedule though this
may not be possible.
For Our Users and Retail Partners
We know our users depend on Clogger products and some work
will continue through the crisis. Currently, we have access to all required
materials and our freight channels are still open. We will let you know if that
To help our retail partners and to provide additional support for our end users, we are going to run a series of offers where we give additional Clogger products with purchase. Expect to see this rolled out over the next few weeks.
This is a period of historic challenge. We are all indebted to the first responders, doctors, nurses, researchers, public health experts and government workers around the world.
We will do our best to communicate as things develop.
Arborists are expected to work in environments which experience extremities of weather. In fact, some arborists consider pushing themselves in extreme conditions as proof of their toughness and ability. Wearing hot chainsaw pants and chaps historically has been part of the challenge.
However, during the summer months, the temperatures experienced may present a clear and present danger to the arborist.
Even in the colder seasons, in locations not normally associated with high average temperatures, the effect of heat can be both significant and pronounced.
25 years ago, the first Clogger chainsaw protection product was produced.
And just to top it off, we recently made our 500,000th product – a pair of Zero chainsaw pants!
Starting with simple products made from basic materials, Clogger has evolved into highly technical apparel platform with one of the largest range of chainsaw protection products globally.
We thought that this was an excellent time for a bit of a review of Clogger including key milestones and a little of the Clogger back story. We’ll also give you a hint as to what the future might hold.
Your chainsaw safety gear is important. Really important. Continuing cases of chainsaw injuries show that there is a real need to educate chainsaw operators on the correct selection and use of chainsaw safety gear.
This guide examines the different styles and options of chainsaw PPE available to the user and how to choose the best chainsaw protection for your unique situation.
And we’re all pretty excited about this launch at Clogger.
We’ve been working on the Zero Gen 2 for months. Getting all the feedback we could on the first generation of the Zero chainsaw pants and thinking how we could improve them. We tested multiple fabrics to make sure this model would be more durable and sent the new Zero to some Arborists to trial.
The main objective was to make them tougher and more durable. We’ve made the changes and to put them to the test under real-life work pressure. The Gen 2 Zeros passed every test that we could think of. And voilà. The Gen 2 Zero is now on the shelf!
But, before getting it, you might wonder: what’s new about the Gen 2 Zero Chainsaw Pants?